November 2026
This monthSafety & Compliance Course
2 weekdays · Wed & Thu
10:30 am – 5:00 pm EST
13 hrs total
Trucking is one of the most regulated industries in North America. Every carrier is measured on its safety record, from Ontario’s CVOR and the National Safety Code to US DOT and FMCSA rules, and one bad audit or a rising violation rate can cost a company its contracts, its insurance or its right to operate. The safety and compliance specialist is the person who keeps that from happening.
In two in-person days in our Toronto classroom, this safety and compliance specialist training shows you how to run a carrier’s compliance program in Canada and the USA: driver and vehicle files, hours of service and ELD records, inspections and maintenance, weights and dimensions, dangerous goods, and getting ready for MTO and DOT audits. This hands-on CVOR and DOT compliance training uses real-world files and scenarios, led by a trainer with more than 10 years in safety and compliance. Whether you are new to trucking or already in the office, you leave able to manage a carrier’s safety and compliance program.
In-person at our Toronto classroom, 55 Village Centre Place, Mississauga, with practical exercises at every step.
2 weekdays · Wed & Thu
10:30 am – 5:00 pm EST
13 hrs total
2 weekdays · Wed & Thu
10:30 am – 5:00 pm EST
13 hrs total
Toronto 55 Village Centre Place, Mississauga ON L4Z 1V9.
Trainer 10+ years of hands-on safety & compliance experience.
Regulators judge a carrier on records. A specialist’s day revolves around four of them, and the course teaches you to build, read and fix each one:
One missed log, expired medical or overdue inspection can turn into a fine, a failed audit or a truck parked at the side of the road.
In Canada, a rising CVOR or NSC violation rate brings interventions from the provincial regulator (such as MTO in Ontario): a warning letter, a facility audit, an interview and, at worst, a sanction that can suspend the carrier’s operating certificate. In the USA, poor inspection results raise a carrier’s CSA scores, trigger FMCSA investigations and can lead to a Conditional or Unsatisfactory safety rating.
Shippers check these records before they hand over freight, and insurers price premiums on them. That is why it is a steady, respected office career, and every carrier with trucks on the road needs someone in this role.
Carriers that cross the border answer to both systems. The course covers each one side by side.
In Ontario, operators of trucks with a registered or actual gross weight over 4,500 kg need a Commercial Vehicle Operator’s Registration (CVOR). Other provinces apply the National Safety Code through their own safety fitness certificates.
You learn MTO safety rules, the CVOR abstract and violation rate, facility audits, Canadian hours of service and ELDs, annual and periodic inspections, weights and dimensions, and Transportation of Dangerous Goods (TDG).
Interstate carriers need a USDOT number and, for hire, FMCSA operating authority. New carriers face a New Entrant Safety Audit in their first 12 months, and every carrier is measured by the CSA program’s BASIC categories.
You learn driver qualification files, drug and alcohol testing and the FMCSA Clearinghouse, US hours of service and ELDs, accident registers, compliance reviews and safety ratings, and HazMat basics.
Join our popular Truck Dispatcher & Freight Broker Specialist course and learn the whole Trucking operation in 16 hours: finding and booking loads, negotiating rates, running dispatch and brokerage software, and operating your own Trucking or Freight Brokerage company.
MAZE Consultancy applies for the authorities and permits you need to run a Trucking business in Canada and the USA, so you can start hauling sooner and stay compliant from day one.
Ask about dates, fees, classroom seats, or training several people from your safety office. We reply within 24 hours.
Fill in your details and choose how you’d like to train, and we’ll confirm your start date.
Two classroom days, four modules: from carrier registration to a full mock audit.
Our truck safety and compliance training comes from a consultancy that works with carriers on audits, certifications and security programs, so the course is built on real files, not just the rulebook.

Your trainer has more than 10 years of hands-on safety and compliance work.
Practise on driver files, logs, maintenance records, CVOR abstracts and a full mock audit.
Questions answered as you set up or improve your company's compliance program.
Earn a Safety & Compliance Specialist certificate of completion.
CVOR, US DOT, the course format and what comes after.
A safety and compliance specialist keeps a trucking company within the rules of the MTO in Canada and the US DOT and FMCSA in the USA. Day to day that means monitoring the carrier’s CVOR record and CSA scores, keeping driver qualification and vehicle files complete, auditing hours-of-service and ELD records, following up on roadside inspections and defects, training drivers and preparing the company for audits.
Anyone who wants a career in trucking safety and compliance, plus trucking company owners, fleet managers, dispatchers and office staff who handle compliance tasks, and owner-operators who want to understand the rules behind every inspection. No prior experience is needed.
The course is 13 hours of in-person classroom training over two weekdays, from 10:30 am to 5:00 pm Eastern each day, at our Toronto classroom, 55 Village Centre Place, Mississauga.
Learn how carrier safety is regulated in Canada and the USA, then practise the work itself: reading CVOR abstracts and CSA scores, building driver and vehicle files, auditing logs and preparing for audits. This course covers all of that in two days and gives you a certificate to show employers. Many specialists start as safety or compliance coordinators and move up to safety manager.
Both. You learn the Canadian system (MTO rules, CVOR, the National Safety Code, Canadian hours of service and TDG) and the US system (US DOT and FMCSA rules, the CSA program, driver qualification files, US hours of service and HazMat basics), so you can manage a carrier that operates on either side of the border.
The Commercial Vehicle Operator’s Registration (CVOR) is Ontario’s registration and safety-monitoring system for commercial carriers. Operators of trucks with a registered or actual gross weight over 4,500 kg need a CVOR certificate. The MTO tracks each carrier’s collisions, convictions and inspections on its CVOR record.
The National Safety Code (NSC) is a set of commercial vehicle safety standards agreed across Canada. Each province applies it through its own rules; outside Ontario, carriers usually operate under a provincial NSC or safety fitness certificate. The course explains how these fit together with Ontario’s CVOR.
CSA (Compliance, Safety, Accountability) is the FMCSA program that measures carrier safety using roadside inspection and crash data. Results are grouped into categories called BASICs, such as Unsafe Driving, Hours-of-Service Compliance and Vehicle Maintenance. High scores can lead to warnings, investigations and a lower safety rating.
New US interstate carriers are placed in the New Entrant program and receive a safety audit within their first 12 months. The audit checks driver qualification, hours of service, drug and alcohol testing, vehicle maintenance and other records. The course shows you how to prepare for it.
For US interstate drivers, a driver qualification file typically holds the employment application, motor vehicle records, a road test or equivalent, the medical examiner’s certificate, previous-employer safety checks and annual reviews. You build a complete file during the course.
Yes. Day 1 covers Canadian and US hours-of-service rules, electronic logging devices and how to audit driver logs.
Yes. You get an overview of Transportation of Dangerous Goods (TDG) rules in Canada and HazMat rules in the USA, and what a carrier must have in place when it hauls dangerous goods.
No. We start from how carrier safety is regulated and build up to running a full compliance program. People already working in dispatch, the office or behind the wheel also take the course to move into a safety role.
Our classroom is at 55 Village Centre Place, Mississauga, minutes from Toronto, Brampton, Oakville, Etobicoke and the rest of the GTA. The course is taught in person only, so you work through real driver files, logs and a mock audit with the trainer beside you.
In person. This course is classroom training only, so every exercise, from reading a CVOR abstract to the mock audit, is done face to face with the trainer.
Yes. You receive a Safety & Compliance Specialist certificate of completion at the end of the course.
Graduates apply for roles such as Safety Coordinator, Compliance Officer, Safety and Compliance Specialist and Safety Manager at trucking companies, as well as office roles where compliance is part of the job.
The fee depends on the format and any promotion running that month. Call +1-905-826-2919 or toll-free +1-888-315-6293 for current pricing and group rates for safety teams.
Yes. Many trainees pair it with our Truck Dispatcher & Freight Broker Specialist course, since dispatchers who understand hours of service, inspections and compliance are more valuable to a carrier.
Reserve a seat in our next Toronto classroom, or call us to train your safety team.